“Snowman Kisses” Printable DIY Stocking Stuffers

Last Updated on February 11, 2021

This "Snowman Kisses" Printable makes for adorable DIY Stocking Stuffers.  

This “Snowman Kisses” printable makes for adorable DIY Stocking Stuffers you can tuck into almost anyone’s stocking.

 

“Snowman Kisses” Printable DIY Stocking Stuffers

Materials

White Box of Tic Tacs
Double Sided Tape or Strong Glue
Scissors
“Snowman Kisses” DIY Stocking Stuffers Printable (best results if printed on white cardstock)

Optional Materials:

X-Acto Knife
Single Hole Punch
Ribbon

 

Directions to assemble “Snowman Kisses” Printable DIY Stocking Stuffers:

1. Cut out Snowman Kisses packaging and poems from the printable.

2. Optional: Using an X-Acto knife, carefully cut out the bottom snowball from the snowman so the Tic Tacs can be seen through the packaging.

3. Fold along the two grey centre lines of the packaging to create a cover for the tic tacs.

4. Place a piece of double sided tape or a drop of strong glue on the inside of the back cover. Place the package of Tic Tacs directly on top – pressing down so it is secure.

5. Add a piece of double sided tape or strong glue to the front (top half) of the Tic Tac packaging, and place the poem on top. You may need to trim down the edges of the poem slightly, so it is aligned with the edge of the Tic Tacs box.

6. Optional: Using a single hole punch, punch a hole along the right side (centred between the top and bottom) in the front and back of the packaging cover. Cut a ribbon and place it through the holes and tie into a bow to complete the cover and keep it closed.

 

"Snowman Kisses" Printable DIY Stocking Stuffers

Ingredients

  • White Box of Tic Tacs
  • Double Sided Tape or Strong Glue
  • Scissors
  • Printable, best results if printed on white cardstock

Optional Materials

  • X-Acto Knife
  • Single Hole Punch
  • Ribbon

Instructions

  1. Cut out Snowman Kisses packaging and poems from the printable.
  2. Optional: Using an X-Acto knife, carefully cut out the bottom snowball from the snowman so the Tic Tacs can be seen through the packaging.
  3. Fold along the two grey centre lines of the packaging to create a cover for the tic tacs.
  4. Place a piece of double sided tape or a drop of strong glue on the inside of the back cover. Place the package of Tic Tacs directly on top – pressing down so it is secure.
  5. Add a piece of double sided tape or strong glue to the front (top half) of the Tic Tac packaging, and place the poem on top. You may need to trim down the edges of the poem slightly, so it is aligned with the edge of the Tic Tacs box.
  6. Optional: Using a single hole punch, punch a hole along the right side (centred between the top and bottom) in the front and back of the packaging cover. Cut a ribbon and place it through the holes and tie into a bow to complete the cover and keep it closed.

Nutrition Information:

Serving Size:

1 grams

Amount Per Serving:Unsaturated Fat: 0g

This "Snowman Kisses" Printable makes for adorable DIY Stocking Stuffers.

3 thoughts on ““Snowman Kisses” Printable DIY Stocking Stuffers

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

shares